The SIMPLE SOLUTION for Part L of the Building Regulations
Great Service, FREE advice and supportSAP New Build
From £100
All new dwellings must now have a SAP calculation performed in order to demonstrate compliance with Part L of the Building Regulations.
SAP Extensions
From £140
If you build an extension where the glazing is over 25% of the floor area, then we can undertake a SAP assessment to demonstrate Part L compliance
SAP Conversions
From £120
If you renovate a building such that there has been a material change in use, then we can undertake a SAP assessment to demonstrate Part L compliance
SBEM Calculations
From £250
Newly constructed and some extended/converted commercial buildings require a SBEM calculation, in order to demonstrate compliance with Part L2 of the Building Regulations
Air Testing
From £175
If you are constructing a dwelling then Approved Document L1A states that, with few exceptions, you must perform an air leakage test
Energy Statements
From £200
To help mitigate the effects of Climate Change, many Local Planning Authorities now require the submission of an Energy Statement as part of a planning application.
Other Services you may require with your SAP CALCULATIONS …
Part G Water Calculations
From £40
Extractor Fan Testing
From £50
Sound Testing
POA
Information to help you ...
SAP New Build, Extensions & Conversions
You may need to supply?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Primary & secondary heating systems
- Renewable technology details (if any)
What’s included?
- All SAP documentation required for compliance with the Building Regulations
- Additional recommendations if required to ensure a pass is achieved every time
- U-Values included as standard
- We are happy to deal directly with your Builder, Architect or Building Control Officer
How much will it cost?
- SAP Assessments start from £100 per unit depending the type of survey, intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
- Duplications of units of the same type available from £80 per unit – Please contact us for details.
- EPC Surveys from £40
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
SBEM Calculations
You may need to supply?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Primary & secondary heating systems
- Renewable technology details (if any)
What’s included?
- All the relevant SBEM (BRUKL) documentation required for compliance with the Building Regulations
- Additional recommendations if required to ensure a pass is achieved every time
- U-Values included as standard
- We are happy to deal directly with your Builder, Architect or Building Control Officer
How much will it cost?
- SBEM Assessments start at £250 per unit depending on the intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
- Duplications of units of the same type available from £80 per unit – Please contact us for details.
- EPC Surveys from £40
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
Air Testing
You may need to supply?
- Integrity of structure must be complete prior to the test
- Access to external door (approx. 2.1m x 0.9m)
- Design stage SAP calculations
- Floor plans and section drawings
- Contact details for site
What’s included?
- Building air leakage test compliant with ATTMA TSL1
- Same day re-testing should building provisionally fail
- Guidance concerning potential air leakage paths
- Air test certificate available within 24 hours
How much will it cost?
- Air Testing starts at £175 per unit depending on the intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
Energy Statements
You may need to supply?
- Floor plans, sections & elevations
- Orientation e.g. site plan
- Construction specification of walls, roofs and floors
- Specification for all windows
- Services specification (i.e. space heating / hot water / lighting / ventilation
- Renewable technology (if any)
- Copy of planning conditions set by LPA (if available)
What’s included?
- Review the relevant Planning policies / conditions.
- Liaise directly with your Planning Officer and Design Team
- Establish site wide emissions using government approved software
- Apply low cost energy efficiency improvements
- Carry out a full renewable technology feasibility study
- Size the most suitable technologies to meet the Council’s policy
- Create a compliant Energy Statement
- All the consultancy required to ensure every development achieves compliance.
How much will it cost?
- Energy Statements start at £200 per unit depending on the intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
Water Caculations
You may need to supply?
- Number of basins and taps and flow rates in l/min
- Number of showers and flow rates in l/min
- Number of toilets & flush volumes
- Kitchen tap flow rate in l/min
- Bath capacity to overflow in litres
- Dishwasher & washing machine details if applicable
What’s included?
- Documentation for compliance with Part G
- Additional necessary recommendations to ensure a pass is achieved every time
- Comprehensive advice and support throughout the whole process
How much will it cost?
- Water Calculations start at £40 per unit depending on the intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
Extractor Fan Testing
You may need to supply?
- The system type to be tested (i.e. System 1 – intermittent fans, System 3 – MEV, System 4 – MVHR)
- Number of extract fans to be tested
- All extract fans should be installed and wired
- Location and contact details of site
What’s included?
- Ventilation testing compliant with Part F of the Building Regulations
- Advice on remedial measures should the testing fail
- Certificates available within 24 hours
How much will it cost?
- Vent Testing starts at £50 per unit depending on the intricacy of the building and the size.
- Discounts may be available for multiple units and repeat custom.
- Please contact us for more tailored quotes.
We can offer a 24hr Fast Track Service on request for an additional £75
Information to help you ...
Sound Testing
You may need to supply?
- Full set of plans of the building
- Provide a brief description of the build. E.G House being converted in to 3 flats etc.
What’s included?
- Review Plans and specification and make any recommendations
Schedule a suitable date for the test - Carry out the tests on-site
- Supply the reports.
How much will it cost?
- Please contact us for a quotes.